Details

---

BUY MJE13005A https://www.utsource.net/itm/p/12596424.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Collector-Emitter Voltage	VCEO			30	V
Emitter-Collector Voltage	VECEO			30	V
Collector-Base Voltage	VCBO			40	V
Base-Emitter Voltage	VBE	-5		5	V
Continuous Collector Current	IC		1.5	2	A	Tc = 25掳C
Pulse Collector Current	ICM		6		A	tp = 8.3 ms, single pulse
DC Current Gain	hFE	10	75	300		IC = 150 mA, VCE = 5V
Transition Frequency	fT		15		MHz	IC = 1 mA, VCE = 5V

Instructions for MJE13005A:

1. Handling and Storage:

   • Handle with care to avoid physical damage.
   • Store in a cool, dry place away from direct sunlight.

2. Mounting:

   • Ensure proper heat sinking if operating at high currents or power levels.
   • Use insulated mounting hardware if insulation from the heat sink is required.

3. Biasing:

   • Ensure that the base current is sufficient to drive the transistor into saturation when used as a switch.
   • For linear applications, bias carefully to maintain operation within safe limits.

4. Operating Limits:

   • Do not exceed the maximum ratings listed in the parameter table.
   • Be aware of thermal considerations; derate power dissipation if operating above room temperature.

5. Testing:

   • When testing, use appropriate protective equipment and follow safety guidelines to prevent electrical shock.
   • Verify all connections are secure and correct before applying power.

6. Applications:

   • Suitable for general-purpose switching and amplification in circuits where moderate power handling is required.

(For reference only)