Details

---

BUY CSC3120 https://www.utsource.net/itm/p/12596438.html

Parameter	Description	Symbol	Min	Typ	Max	Unit
Supply Voltage	Operating voltage range	Vcc	2.7	-	5.5	V
Operating Current	Current consumption at typical operating conditions	Icc	-	1.5	-	mA
Input Voltage Range	Range for input signals	Vin	0	-	Vcc	V
Output Voltage Swing	Output voltage swing from high to low	Voh to Vol	-	Vcc-0.4 to 0.4	-	V
Propagation Delay Time	Time delay between input and output	tpd	-	10	-	ns
Storage Temperature	Temperature range for storage	Tstg	-40	-	85	掳C
Operating Temperature	Temperature range for operation	Topr	-40	-	85	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 2.7V to 5.5V.
   • Connect the Vcc pin to the positive power supply and GND to the ground.

2. Input Signals:

   • Input signals should be within the range of 0V to Vcc.
   • Avoid exceeding the maximum input voltage to prevent damage.

3. Output Configuration:

   • The output voltage swing is typically from Vcc-0.4V to 0.4V.
   • Ensure the load connected to the output can handle the voltage levels.

4. Timing Considerations:

   • The propagation delay time (tpd) is typically 10ns. Account for this delay in your timing calculations.

5. Temperature Range:

   • The device is designed to operate within a temperature range of -40掳C to 85掳C.
   • Store the device within the same temperature range to ensure reliability.

6. Handling Precautions:

   • Handle the device with care to avoid static discharge.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling the component.

7. Mounting and Soldering:

   • Use appropriate soldering techniques to avoid thermal shock.
   • Ensure proper alignment and orientation during mounting.

8. Testing and Validation:

   • Test the device under typical operating conditions to verify performance.
   • Refer to the datasheet for detailed test procedures and specifications.

(For reference only)