Details

---

BUY IRS2092STRPBF-JSM https://www.utsource.net/itm/p/12596439.html

Parameter	Description	Value	Unit
Part Number	Component Identifier	IRS2092STRPBF-JSM	-
Package Type	Package Style	SO-8	-
Supply Voltage (Vcc)	Operating Supply Voltage Range	10 to 60	V
Quiescent Current (Iq)	Quiescent Current at Vcc = 15V	1.5	mA
Output Current (Iout)	Maximum Output Current	±300	mA
Operating Temperature (Toper)	Operating Temperature Range	-40 to 125	°C
Storage Temperature (Tstg)	Storage Temperature Range	-65 to 150	°C
Input High Level (VIH)	Minimum Input High Level Voltage	2.0	V
Input Low Level (VIL)	Maximum Input Low Level Voltage	0.8	V
Propagation Delay Time (tpd)	Propagation Delay Time	50	ns
Rise Time (tr)	Rise Time	20	ns
Fall Time (tf)	Fall Time	20	ns
Maximum Power Dissipation (Pd)	Maximum Power Dissipation	1.1	W
Isolation Voltage (Viso)	Isolation Voltage	2500	Vrms
Leakage Current (Ileak)	Leakage Current at Vcc = 60V	10	μA

Instructions for Use:

1. Power Supply Connection:

   • Connect the Vcc pin to the positive supply voltage within the specified range (10 to 60V).
   • Connect the GND pin to the system ground.

2. Signal Input:

   • Apply the input signal to the IN pin. Ensure the signal levels are within the specified VIH and VIL ranges.
   • The IN pin is compatible with CMOS and TTL logic levels.

3. Output Configuration:

   • Connect the OUT pin to the load or next stage circuit.
   • Ensure the load current does not exceed the maximum output current rating (±300mA).

4. Thermal Management:

   • Ensure adequate heat dissipation if operating near the maximum power dissipation (1.1W). Consider using a heatsink if necessary.

5. Isolation:

   • The device provides isolation up to 2500Vrms. Ensure proper PCB layout to maintain this isolation.

6. Storage and Handling:

   • Store the device in a dry environment within the specified storage temperature range (-65 to 150°C).
   • Handle with care to avoid damage from electrostatic discharge (ESD).

7. Testing and Troubleshooting:

   • Verify the supply voltage and input signals are within the specified ranges.
   • Check for proper connections and ensure the device is not overheating.
   • If issues persist, refer to the datasheet for more detailed troubleshooting information.

(For reference only)