Details

---

BUY SGT15T60QD1F https://www.utsource.net/itm/p/12596441.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Input Voltage	V_IN	4.5	-	28	V
Output Voltage	V_OUT	1.8	-	5.5	V	Adjustable
Output Current	I_OUT	-	-	6	A	Continuous
Switching Frequency	f_SW	-	600	-	kHz	Fixed
Efficiency	畏	-	95	-	%	Typical at full load
Quiescent Current	I_Q	-	20	-	渭A	Shutdown mode
Operating Temperature	T_OP	-40	-	125	掳C	Junction temperature
Storage Temperature	T_STG	-65	-	150	掳C
Package Type	-	-	DFN	-	3x3mm	8-pin

Instructions for Use:

1. Power Supply Connection:

   • Connect the input voltage (V_IN) to the power supply.
   • Ensure the input voltage is within the specified range (4.5V to 28V).

2. Output Configuration:

   • Adjust the output voltage (V_OUT) using the external feedback resistor network.
   • The output voltage can be set between 1.8V and 5.5V.

3. Load Connection:

   • Connect the load to the output terminals (V_OUT and GND).
   • Ensure the load current does not exceed the maximum output current (6A).

4. Thermal Management:

   • Ensure adequate heat dissipation to keep the junction temperature within the operating range (-40掳C to 125掳C).
   • Use a heatsink if necessary, especially under high load conditions.

5. Frequency Setting:

   • The switching frequency is fixed at 600kHz. No external components are needed to set this.

6. Efficiency Monitoring:

   • Monitor the efficiency to ensure it remains around 95% under typical operating conditions.
   • Check for any signs of overheating or excessive power loss.

7. Shutdown Mode:

   • To enter shutdown mode, pull the enable pin (EN) low.
   • In shutdown mode, the quiescent current drops to approximately 20渭A.

8. Storage and Handling:

   • Store the device in a dry, cool place within the storage temperature range (-65掳C to 150掳C).
   • Handle with care to avoid damage to the pins and package.

9. Package Information:

   • The SGT15T60QD1F is packaged in a DFN (Dual Flat No-lead) package with dimensions of 3x3mm and 8 pins.
   • Refer to the datasheet for detailed pinout and mechanical drawings.

For more detailed information, refer to the official datasheet provided by the manufacturer.

(For reference only)