Details

---

BUY SJE2938 https://www.utsource.net/itm/p/12596470.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	4.5	5.0	5.5	V	Operating voltage range
Output Current	Iout	-	100	200	mA	Maximum continuous output current
Quiescent Current	Iq	1	2	3	渭A	Current consumed when no load is applied
Operating Temperature	Toper	-40	-	85	掳C	Temperature range for normal operation
Storage Temperature	Tstg	-65	-	150	掳C	Temperature range for storage
Input Voltage Range	Vin	0	-	5.5	V	Range of input voltages the device can handle
Output Voltage Range	Vout	0	-	5.5	V	Range of output voltages the device can provide
Rise Time	tr	-	10	20	ns	Time for output to rise from 10% to 90%
Fall Time	tf	-	10	20	ns	Time for output to fall from 90% to 10%
Propagation Delay	tpdl	-	15	25	ns	Time delay from input to output
Power Dissipation	Pd	-	-	600	mW	Maximum power dissipation
ESD Rating	ESD	-	-	2000	V	Electrostatic discharge tolerance

Instructions for Using SJE2938

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.5V to 5.5V.
   • Connect the Vcc pin to a stable power source.

2. Output Configuration:

   • The maximum continuous output current (Iout) is 200mA. Do not exceed this limit to avoid damage.
   • Connect the load to the output pin (Vout).

3. Quiescent Current:

   • The quiescent current (Iq) is typically 2渭A. This is the current consumed by the device when no load is applied.

4. Temperature Considerations:

   • The operating temperature range (Toper) is from -40掳C to 85掳C. Ensure the device operates within this range to maintain performance.
   • The storage temperature range (Tstg) is from -65掳C to 150掳C. Store the device in this range to prevent damage.

5. Input and Output Voltages:

   • The input voltage (Vin) should be within the range of 0V to 5.5V.
   • The output voltage (Vout) will also be within the range of 0V to 5.5V, depending on the input and load conditions.

6. Timing Parameters:

   • The rise time (tr) and fall time (tf) are typically 10ns and 20ns, respectively. These parameters are important for high-speed applications.
   • The propagation delay (tpdl) is typically 15ns, which is the time delay from input to output.

7. Power Dissipation:

   • The maximum power dissipation (Pd) is 600mW. Ensure adequate heat dissipation if the device is operating near this limit.

8. ESD Protection:

   • The device has an ESD rating of 2000V. Handle the device with care to avoid electrostatic discharge.

9. Mounting and Handling:

   • Follow standard surface mount technology (SMT) guidelines for mounting the device.
   • Use appropriate tools and techniques to avoid mechanical stress on the pins and body.

10. Testing and Troubleshooting:

    • Test the device under controlled conditions to ensure it meets the specified parameters.
    • If issues arise, check the power supply, connections, and environmental conditions.

(For reference only)