Details

---

BUY MIP2K5 https://www.utsource.net/itm/p/12596484.html

Parameter	Description	Value
Part Number	Full part number	MIP2K5
Type	Device type	Voltage Reference
Output Voltage	Nominal output voltage	2.5V
Accuracy	Initial accuracy at 25掳C	卤0.2%
Temperature Coefficient	Temperature coefficient (ppm/掳C)	卤5
Operating Current	Operating current (Iq) at Vout = 2.5V, Ta = 25掳C	150 渭A
Load Regulation	Load regulation (1 mA to 50 mA)	卤0.05%
Line Regulation	Line regulation (4.5V to 16V)	卤0.01%
Dropout Voltage	Dropout voltage (Vdo) at Iout = 50 mA	130 mV
Operating Temperature Range	Operating temperature range	-40掳C to +125掳C
Package	Package type	SOT-23
Mounting	Mounting type	Surface mount

Instructions for Use:

1. Power Supply:

   • Connect the input voltage (VIN) to the VIN pin.
   • Ensure the input voltage is within the operating range (4.5V to 16V).

2. Ground Connection:

   • Connect the GND pin to the system ground.

3. Output Connection:

   • Connect the output voltage (VOUT) to the load or the circuit requiring a stable 2.5V reference.

4. Capacitors:

   • Place a 1 渭F ceramic capacitor between the VIN and GND pins close to the device to ensure stability.
   • Optionally, place a 1 渭F ceramic capacitor between the VOUT and GND pins to improve transient response and stability.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if the device is operating near its maximum power dissipation limits.
   • The device can dissipate up to 750 mW, but thermal resistance (胃JA) should be considered for high-power applications.

6. Storage and Handling:

   • Store in a dry environment to prevent moisture damage.
   • Handle with care to avoid static discharge, which can damage the device.

7. Testing:

   • Test the device under typical operating conditions to verify performance parameters such as output voltage, accuracy, and line/load regulation.

8. Compliance:

   • Ensure the device meets all relevant safety and regulatory standards for your application.

(For reference only)