Details

---

BUY IRS2153D https://www.utsource.net/itm/p/12596512.html

Parameter	Symbol	Min	Typical	Max	Unit	Description
Supply Voltage	VCC	10.5	-	20	V	Operating supply voltage range
High-Side Floating Voltage	VFLOAT	-	-	600	V	Maximum high-side floating voltage
Input High Voltage	VIH	2.0	-	-	V	Input high logic level voltage
Input Low Voltage	VIL	-	-	0.8	V	Input low logic level voltage
Output High Voltage (High Side)	VOH	-	14.5	-	V	Output high voltage (high side) at VCC = 15V, IOL = -10mA
Output Low Voltage (High Side)	VOL	-	2.5	-	V	Output low voltage (high side) at VCC = 15V, IOH = 10mA
Output High Voltage (Low Side)	VOH	-	13.5	-	V	Output high voltage (low side) at VCC = 15V, IOL = -10mA
Output Low Voltage (Low Side)	VOL	-	0.4	-	V	Output low voltage (low side) at VCC = 15V, IOH = 10mA
Propagation Delay Time (High to Low)	tdHL	-	150	-	ns	Propagation delay time from input high to output low
Propagation Delay Time (Low to High)	tdLH	-	150	-	ns	Propagation delay time from input low to output high
Minimum Pulse Width	tPWmin	70	-	-	ns	Minimum pulse width for reliable operation
Maximum Duty Cycle	Dmax	-	-	99.5	%	Maximum duty cycle for reliable operation
Operating Temperature Range	TA	-40	-	125	掳C	Ambient operating temperature range
Storage Temperature Range	TSTG	-65	-	150	掳C	Storage temperature range

Instructions for Using IRS2153D:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range (10.5V to 20V).
   • The high-side floating voltage (V_FLOAT) can go up to 600V.

2. Input Logic Levels:

   • Use input high voltage (V_IH) of at least 2.0V to ensure a high logic level.
   • Use input low voltage (V_IL) of no more than 0.8V to ensure a low logic level.

3. Output Voltage Levels:

   • The high-side output high voltage (V_OH) should be around 14.5V when V_CC is 15V and the load current (I_OL) is -10mA.
   • The high-side output low voltage (V_OL) should be around 2.5V when V_CC is 15V and the load current (I_OH) is 10mA.
   • The low-side output high voltage (V_OH) should be around 13.5V when V_CC is 15V and the load current (I_OL) is -10mA.
   • The low-side output low voltage (V_OL) should be around 0.4V when V_CC is 15V and the load current (I_OH) is 10mA.

4. Timing Parameters:

   • Ensure the propagation delay times (t_dHL and t_dLH) are considered in your design, typically around 150ns.
   • The minimum pulse width (t_PWmin) should be at least 70ns to ensure reliable operation.
   • The maximum duty cycle (D_max) should not exceed 99.5%.

5. Temperature Considerations:

   • Operate the device within the ambient temperature range (-40掳C to 125掳C).
   • Store the device within the storage temperature range (-65掳C to 150掳C).

6. Layout and PCB Design:

   • Ensure proper decoupling capacitors are placed close to the power pins to minimize noise and improve stability.
   • Use short and wide traces for high-frequency signals to reduce parasitic inductance and resistance.

7. Safety and Compliance:

   • Follow all safety guidelines and compliance standards applicable to your application.
   • Ensure proper heat dissipation if the device is expected to operate at high temperatures or under high load conditions.

(For reference only)