Details

---

BUY 2SC5200N https://www.utsource.net/itm/p/12596513.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	800	V
Collector-Base Voltage	VCBO	-	-	900	V
Emitter-Base Voltage	VEBO	-	-	12	V
Continuous Collector Current	IC	-	-	15	A
Pulse Collector Current	ICM	-	-	30	A
DC Current Gain	hFE	20	70	200	-
Transition Frequency	fT	-	10	-	MHz
Storage Temperature Range	TSTG	-55	-	150	掳C
Operating Temperature Range	TA	-55	-	150	掳C

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to manage power dissipation.
   • Use insulated mounting hardware to avoid short circuits.

2. Biasing:

   • Apply base current (I_B) carefully to control collector current (I_C).
   • Use a current-limiting resistor in series with the base to prevent excessive base current.

3. Overvoltage Protection:

   • Use a Zener diode across the collector and emitter to protect against voltage spikes.

4. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed the maximum rating.
   • Use thermal paste between the transistor and the heatsink for better heat transfer.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

6. Testing:

   • Test the transistor using a multimeter or transistor tester to ensure it is functioning correctly before installation.
   • Check for continuity and resistance values to identify any potential issues.

(For reference only)