Details

---

BUY JQ1AP-12V-F AJQ8341F https://www.utsource.net/itm/p/12596515.html

Parameter	Value	Description
Part Number	JQ1AP-12V-F AJQ8341F	Relay model
Coil Voltage	12V	Rated voltage for the relay coil
Coil Power	0.5W	Power consumption of the relay coil
Coil Resistance	240Ω	Resistance of the relay coil
Contact Form	SPDT	Single Pole Double Throw
Contact Rating	10A at 250VAC	Maximum current and voltage capacity
Insulation Resistance	100MΩ min	Between contacts and coil
Dielectric Strength	1500VAC	Isolation voltage
Operating Temperature	-40°C to +85°C	Ambient temperature range
Operating Humidity	5% to 95% RH	Relative humidity range
Mechanical Life	10 million operations	Expected mechanical operation cycles
Electrical Life	100,000 operations	Expected electrical operation cycles
Weight	10g	Weight of the relay

Instructions:

1. Installation: Ensure the relay is installed in a well-ventilated area within the specified operating temperature and humidity ranges.
2. Power Supply: Connect the relay coil to a power supply matching the rated coil voltage (12V).
3. Wiring: Wire the common (COM), normally open (NO), and normally closed (NC) terminals according to your circuit requirements.
4. Handling: Avoid excessive mechanical stress on the relay during installation and operation.
5. Maintenance: Periodically inspect the relay for signs of wear or damage. Replace if necessary.
6. Safety: Do not exceed the contact rating to prevent overheating and potential failure.

(For reference only)