Details

---

BUY D7810HG https://www.utsource.net/itm/p/12597135.html

Parameter	Description	Value
Input Voltage	Operating voltage range	10V to 35V
Output Voltage	Regulated output voltage	10V
Output Current	Maximum continuous current	1.5A
Quiescent Current	Supply current at no load	6mA
Dropout Voltage	Minimum input-output voltage difference for regulation	2V
Operating Temp.	Junction operating temperature	-40掳C to +125掳C
Package Type	Encapsulation type	TO-220

Instructions:

1. Installation: Ensure the D7810HG is installed in a circuit with an adequate heat sink if it will be operating near its maximum output current to prevent overheating.
2. Input Voltage: Connect the input pin to a power supply that provides a stable voltage within the specified range of 10V to 35V.
3. Output Configuration: The output pin should be connected directly to the load requiring a regulated 10V supply. Ensure that the total current drawn by the load does not exceed 1.5A.
4. Capacitors: It is recommended to place a 0.33渭F capacitor between the input and ground, and a 0.1渭F capacitor between the output and ground to ensure stability.
5. Temperature Management: Monitor the junction temperature to ensure it stays within the -40掳C to +125掳C range. Use appropriate cooling methods if necessary.
6. Safety: Always observe proper safety precautions when handling electrical components. Ensure correct polarity and voltage levels to avoid damage to the device or injury.

(For reference only)