Details

---

BUY 74HC670 https://www.utsource.net/itm/p/12597162.html

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	VCC	2.0	-	6.0	V
Input Low Voltage	VIL	-	0.8	-	V
Input High Voltage	VIH	-	2.0	-	V
Output Low Voltage	VOL	-	0.1	0.4	V
Output High Voltage	VOH	2.4	-	-	V
Input Leakage Current	IIL	-	1.0	-	渭A
Output Sink Current	IOL	-	25	-	mA
Output Source Current	IOH	-	25	-	mA
Propagation Delay Time	tpd	-	12	-	ns
Power Dissipation	PD	-	-	100	mW
Operating Temperature Range	TA	-40	-	85	掳C

Instructions for Using the 74HC670:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 6.0V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • Apply input signals with voltages between 0V and V_CC.
   • For logic low, keep the input voltage below 0.8V.
   • For logic high, keep the input voltage above 2.0V.

3. Output Signals:

   • The output voltage for logic low should be less than 0.4V.
   • The output voltage for logic high should be greater than 2.4V.
   • Ensure that the output current does not exceed 25mA for both sink and source conditions.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 12ns. This is the time it takes for the output to change state after the input changes.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C to ensure reliable performance.

6. Power Dissipation:

   • The maximum power dissipation (P_D) is 100mW. Ensure proper heat dissipation if operating near this limit.

7. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Use appropriate decoupling capacitors close to the power pins to minimize noise and improve stability.

8. Storage and Packaging:

   • Store the device in a dry, cool environment to prevent moisture damage.
   • Follow ESD (Electrostatic Discharge) precautions during handling and installation.

By adhering to these guidelines, you can ensure optimal performance and reliability of the 74HC670 device.

(For reference only)