Details

---

BUY LMX2306TM https://www.utsource.net/itm/p/12597170.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	2.7	-	5.5	V
Operating Temperature	Ta	-40	-	85	掳C
Output Frequency Range	fOUT	10	-	600	MHz
Reference Input Frequency	fREF	10	-	100	MHz
Phase Noise at 10 kHz	-	-	-125	-	dBc/Hz
RMS Jitter	-	-	1.5	-	ps
Power Consumption	-	-	120	-	mW

Instructions for Using LMX2306TM

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 2.7V to 5.5V.
   • Use a stable power source to avoid fluctuations that can affect performance.

2. Operating Temperature (Ta):

   • The device operates reliably between -40掳C and 85掳C.
   • Avoid exposing the device to temperatures outside this range to prevent damage.

3. Output Frequency Range (fOUT):

   • The output frequency can be set between 10 MHz and 600 MHz.
   • Use the appropriate control signals or settings to configure the desired output frequency.

4. Reference Input Frequency (fREF):

   • The reference input frequency should be between 10 MHz and 100 MHz.
   • Ensure the reference signal is clean and stable to maintain accurate output frequency.

5. Phase Noise:

   • The phase noise at 10 kHz offset from the carrier is typically -125 dBc/Hz.
   • This value helps in assessing the quality of the generated signal.

6. RMS Jitter:

   • The typical RMS jitter is 1.5 ps.
   • Lower jitter values indicate better signal stability and quality.

7. Power Consumption:

   • The typical power consumption is 120 mW.
   • Ensure the power supply can handle the current requirements of the device.

8. Installation and Handling:

   • Handle the device with care to avoid static discharge.
   • Follow standard PCB layout guidelines to minimize noise and interference.

9. Testing and Validation:

   • After installation, test the device under various conditions to ensure it meets the specified performance parameters.
   • Use appropriate test equipment to measure phase noise, output frequency, and other critical parameters.

(For reference only)