Details

---

BUY A7800A https://www.utsource.net/itm/p/12597175.html

Parameter	Description	Value
Part Number	Device Identifier	A7800A
Type	Device Type	Voltage Regulator
Output Voltage	Fixed Output Voltage	5V
Input Voltage	Operating Input Voltage Range	7V to 24V
Output Current	Maximum Continuous Output Current	1.5A
Dropout Voltage	Typical Dropout Voltage	1.2V at 1.5A
Quiescent Current	Quiescent Current	5mA
Thermal Shutdown	Thermal Shutdown Protection	Yes
Short-Circuit Protection	Short-Circuit Protection	Yes
Operating Temperature	Operating Temperature Range	-40掳C to 125掳C
Package	Package Type	TO-220

Instructions for Use

1. Circuit Connection:

   • Input (IN): Connect the input voltage to this pin.
   • Ground (GND): Connect this pin to the common ground.
   • Output (OUT): Connect the load or circuit requiring regulated 5V to this pin.

2. Capacitors:

   • Input Capacitor: Place a 0.33 渭F ceramic capacitor between the input and ground as close to the regulator as possible.
   • Output Capacitor: Place a 0.1 渭F ceramic capacitor between the output and ground to stabilize the output voltage.

3. Heat Dissipation:

   • Ensure adequate heat dissipation by using a heatsink if the regulator is expected to dissipate more than 1W of power. The power dissipation can be calculated using the formula: [ P = (V_{text} - V_{text}) times I_{text} ]
   • For example, with an input voltage of 12V and an output current of 1.5A, the power dissipation would be: [ P = (12V - 5V) times 1.5A = 10.5W ]

4. Thermal Considerations:

   • The device has built-in thermal shutdown protection, but it is still important to ensure that the junction temperature does not exceed 125掳C to prevent damage.

5. Storage and Handling:

   • Store the device in a dry, cool place.
   • Handle with care to avoid damaging the leads or the body of the device.

6. Testing:

   • Before connecting the device to your circuit, test the output voltage with a multimeter to ensure it is within the specified range.

7. Troubleshooting:

   • If the output voltage is not stable, check the input voltage and the capacitors.
   • If the device overheats, ensure proper heat dissipation and check the input voltage and current draw.

By following these instructions, you can ensure reliable operation of the A7800A voltage regulator in your application.

(For reference only)