Details

---

BUY SC802-06-TE12RA https://www.utsource.net/itm/p/12597211.html

Parameter	Value/Description
Component Type	Surface Mount Inductor
Part Number	SC802-06-TE12RA
Manufacturer	Sumida Corporation
Series	SC802
Inductance (L)	6.0 渭H 卤 20%
DC Resistance (Rdc)	0.035 惟 max
Saturation Current	1.2 A (at 30% inductance drop)
Rated Current	1.2 A (at 40掳C temperature rise)
Operating Temperature	-40掳C to +125掳C
Frequency Range	Up to 100 MHz
Shielding	Shielded
Case Size	0805 (2.0 x 2.5 mm)
Height	1.2 mm max
Tolerance	卤20%
RoHS Compliance	Yes
Package Type	Tape & Reel

Instructions for Use:

1. Mounting:

   • Place the component on the PCB using standard SMT placement equipment.
   • Ensure that the component is aligned correctly with the pads.

2. Soldering:

   • Use a reflow soldering process with a peak temperature of 260掳C.
   • Avoid overheating as it can damage the component.
   • Ensure good solder joints to maintain electrical performance and mechanical stability.

3. Handling:

   • Handle the component with care to avoid mechanical stress or damage.
   • Store in a dry environment to prevent moisture absorption.

4. Testing:

   • Measure the inductance and DC resistance using a suitable LCR meter.
   • Verify that the inductance is within the specified tolerance range.
   • Check the saturation current by applying the rated current and measuring the inductance drop.

5. Design Considerations:

   • Ensure adequate clearance around the component to allow for heat dissipation.
   • Consider the operating temperature range and environmental conditions when designing the circuit.
   • Use the component in applications where a compact, high-performance inductor is required, such as power supplies, filters, and signal conditioning circuits.

(For reference only)