Details

---

BUY AO4614-MS(5pcs) https://www.utsource.net/itm/p/12597226.html

Parameter	Description	Value
Part Number	Component Identifier	AO4614-MS
Quantity	Number of Units	5 pcs
Type	Component Type	MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor)
Package	Physical Package	SOT-23-3L
VDS (Max)	Drain-to-Source Voltage	30V
VGS (Max)	Gate-to-Source Voltage	卤12V
ID (Max)	Continuous Drain Current	1.7A (at 25掳C)
RDS(on)	On-State Resistance	0.08惟 (at VGS = 4.5V)
Power Dissipation	Maximum Power Dissipation	410mW (at 25掳C)
Operating Temperature Range	Temperature Range for Operation	-40掳C to 125掳C
Storage Temperature Range	Temperature Range for Storage	-65掳C to 150掳C
Gate Charge	Total Gate Charge	12nC
Input Capacitance	Capacitance at Input	30pF (at VDS = 10V)
Output Capacitance	Capacitance at Output	110pF (at VDS = 10V)
Reverse Transfer Capacitance	Capacitance from Drain to Source	10pF (at VDS = 10V)

Instructions:

1. Handling and Storage:

   • Store the AO4614-MS in a dry, cool place within the specified storage temperature range.
   • Handle with care to avoid static discharge, which can damage the MOSFET.

2. Mounting:

   • Ensure that the PCB layout provides adequate heat dissipation to prevent the MOSFET from exceeding its maximum operating temperature.
   • Follow standard soldering procedures to avoid thermal shock and ensure good electrical connections.

3. Electrical Connections:

   • Connect the Drain (D), Source (S), and Gate (G) terminals according to the circuit diagram.
   • Ensure that the gate voltage does not exceed the maximum V_GS rating to prevent damage to the device.

4. Testing:

   • Use a multimeter or an appropriate test setup to verify the continuity and resistance values before and after installation.
   • Test the device under load conditions to ensure it operates within the specified parameters.

5. Safety:

   • Always use appropriate safety equipment when handling electronic components.
   • Ensure that the circuit is powered down before making any physical connections or modifications.

6. Troubleshooting:

   • If the MOSFET fails to operate correctly, check for proper connections, correct polarity, and absence of short circuits.
   • Verify that the supply voltages and currents are within the specified limits.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)