Details

---

BUY M74HC00B1 https://www.utsource.net/itm/p/12597537.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.0	-	6.0	V
Input Low Voltage	VIL	VCC = 4.5V to 5.5V	-	-	1.5	V
Input High Voltage	VIH	VCC = 4.5V to 5.5V	3.5	-	-	V
Output Low Voltage	VOL	IOL = 8mA, VCC = 4.5V to 5.5V	0.4	-	-	V
Output High Voltage	VOH	IOH = -400渭A, VCC = 4.5V to 5.5V	-	-	2.4	V
Input Leakage Current	IIL	VCC = 0V to 6V	-1	-	1	渭A
Output Leakage Current	IOL	VCC = 0V to 6V	-10	-	10	渭A
Propagation Delay Time	tpd	VCC = 4.5V to 5.5V, VOH = 3.5V, VOL = 1.5V	-	9	-	ns
Power Dissipation	Ptot	TA = 25掳C	-	-	100	mW
Operating Temperature	TA	Storage	-40	-	85	掳C

Instructions for Using M74HC00B1

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 6.0V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • Apply input signals such that the low-level voltage (V_IL) does not exceed 1.5V and the high-level voltage (V_IH) is at least 3.5V when V_CC is between 4.5V and 5.5V.
   • Ensure input leakage current (I_IL) is within 卤1渭A.

3. Output Signals:

   • The output low voltage (V_OL) should be no more than 0.4V when sourcing 8mA.
   • The output high voltage (V_OH) should be at least 2.4V when sinking -400渭A.
   • Ensure output leakage current (I_OL) is within 卤10渭A.

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 9ns under standard conditions (V_CC = 4.5V to 5.5V).

5. Temperature:

   • Operate the device within the temperature range of -40掳C to 85掳C for reliable performance.

6. Power Dissipation:

   • Keep the total power dissipation (P_tot) below 100mW to avoid overheating.

7. Handling:

   • Handle the device with care to avoid static damage. Use proper ESD protection measures.

8. Storage:

   • Store the device in a dry, cool place away from direct sunlight and extreme temperatures.

By following these guidelines, you can ensure optimal performance and reliability of the M74HC00B1 quad 2-input positive-NAND gates.

(For reference only)