Details

---

BUY G2L-1-V-24VDC https://www.utsource.net/itm/p/12597879.html

Parameter	Description	Value
Model	Relay Model	G2L-1-V-24VDC
Type	Relay Type	SPDT (Single Pole Double Throw)
Coil Voltage	Operating Voltage for Coil	24V DC
Coil Current	Operating Current for Coil	30mA
Contact Form	Contact Configuration	1C.O. (1 Change Over)
Contact Rating	Maximum Switching Capacity	5A at 250V AC / 30V DC
Insulation Resistance	Between Contacts and Coil	100M惟 (Min) at 250V DC
Dielectric Strength	Between Contacts and Coil	1500V AC for 1 minute
Operating Temperature	Ambient Operating Temperature Range	-40掳C to +85掳C
Storage Temperature	Storage Temperature Range	-40掳C to +125掳C
Mechanical Life	Mechanical Operation Life	10 million operations
Electrical Life	Electrical Operation Life (at rated load)	100,000 operations
Weight	Weight of Relay	5g
Dimensions	Dimensions (W x D x H)	17.5mm x 12.2mm x 12.2mm

Instructions:

1. Installation:

   • Ensure the relay is installed in a clean, dry environment.
   • Mount the relay on a flat surface using the provided mounting holes.
   • Avoid exposure to excessive vibrations or mechanical shock.

2. Wiring:

   • Connect the coil terminals to the 24V DC power supply.
   • Connect the common (COM) terminal to the circuit you want to control.
   • Connect the normally open (NO) and normally closed (NC) terminals to the appropriate parts of your circuit.

3. Operation:

   • When the coil is energized, the contacts will switch from the NC position to the NO position.
   • When the coil is de-energized, the contacts will return to the NC position.
   • Ensure the load connected to the relay does not exceed the contact rating.

4. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Clean the relay with a soft, dry cloth if necessary.
   • Do not use abrasive materials or solvents that could damage the relay.

5. Safety:

   • Always disconnect the power before performing any maintenance or wiring changes.
   • Follow all local electrical codes and regulations.
   • Use appropriate personal protective equipment (PPE) when handling the relay.

(For reference only)