Details

---

BUY TLP2161 https://www.utsource.net/itm/p/12597880.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Input Forward Voltage	VIF	-	1.2	1.6	V	IF = 5 mA
Input Current	IF	-	5	20	mA	VIF = 1.4 V
Output Collector-Emitter Saturation Voltage	VCE(sat)	-	0.3	0.5	V	IC = 100 mA, VCE = 5 V
Output Collector Current	IC	-	100	150	mA	VCE = 5 V
Isolation Voltage	VIORM	-	-	5000	Vrms	1 min, 50/60 Hz
Operating Temperature	TOP	-40	-	85	掳C
Storage Temperature	TSTG	-40	-	125	掳C

Instructions for Using TLP2161:

1. Power Supply:

   • Ensure that the power supply voltage is within the specified range to avoid damage to the device.

2. Input Connection:

   • Connect the input side (anode and cathode) to the control signal source. The forward current should be within the specified range to ensure reliable operation.

3. Output Connection:

   • Connect the output side (collector and emitter) to the load. Ensure that the load current does not exceed the maximum collector current rating.

4. Isolation:

   • The TLP2161 provides electrical isolation between the input and output sides. Ensure that the isolation voltage ratings are not exceeded to maintain safety and performance.

5. Temperature Considerations:

   • Operate the device within the specified operating temperature range to ensure reliable performance. Store the device within the storage temperature range to prevent damage.

6. Mounting:

   • Mount the device on a suitable heat sink if high power dissipation is expected. Follow proper PCB layout guidelines to minimize noise and interference.

7. Testing:

   • Before final assembly, test the device with the specified conditions to ensure it meets the required performance parameters.

8. Handling:

   • Handle the device with care to avoid mechanical stress or damage. Use appropriate ESD protection measures during handling and assembly.

9. Compliance:

   • Ensure that the device complies with all relevant safety and regulatory standards for the intended application.

(For reference only)