Details

---

BUY ACR44U16LE https://www.utsource.net/itm/p/12597897.html

Parameter	Description	Value	Unit
Device Type	Contactless Reader Module	ACR44U16LE	-
Interface	Communication Interface	USB	-
Operating Voltage	Supply Voltage	5	V
Operating Current	Supply Current	200	mA
Operating Temperature	Ambient Temperature Range	-25 to +70	掳C
Storage Temperature	Storage Temperature Range	-40 to +85	掳C
Relative Humidity	Non-condensing Relative Humidity	20% to 90%	%
RF Frequency	Radio Frequency	13.56	MHz
ISO Standards	Supported ISO/IEC Standards	14443, 15693	-
Dimensions	Module Size	60 x 30 x 10	mm
Weight	Module Weight	20	g

Instructions for Use:

1. Power Supply: Ensure the operating voltage is set to 5V DC. Connect the module to a stable power source or a USB port.
2. Installation: Install the provided drivers and software on your computer to facilitate communication with the module via USB.
3. Operating Environment: Place the module in an environment within the specified temperature and humidity ranges to ensure optimal performance.
4. Antenna Placement: Ensure there are no obstructions near the antenna area of the module for reliable RFID card reading.
5. Software Configuration: Configure the reader settings through the provided software interface to match your application requirements.
6. Card Compatibility: Verify that the cards you intend to use comply with the supported ISO standards (14443, 15693).
7. Handling Precautions: Avoid exposing the module to extreme temperatures or humid environments outside the specified ranges. Handle with care to prevent physical damage.

For detailed setup and advanced configurations, refer to the user manual provided by the manufacturer.

(For reference only)