Details

---

BUY YH119-012-1H11-1S-P https://www.utsource.net/itm/p/12598104.html

Parameter	Value
Part Number	YH119-012-1H11-1S-P
Type	Relay
Coil Voltage	12V DC
Coil Power	1.44W
Coil Resistance	100惟
Contact Form	SPDT (Single Pole, Double Throw)
Contact Rating	10A @ 250V AC
Insulation Resistance	100M惟 min @ 500V DC
Dielectric Strength	1500V AC for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Operating Humidity	5% to 95% RH
Mechanical Life	100,000 cycles
Electrical Life	10,000 cycles (resistive load)
Terminal Type	Pin Terminals
Weight	15g

Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Use the provided pin terminals for secure connections.

2. Coil Connection:

   • Connect the coil terminals to a 12V DC power supply.
   • Ensure the polarity is correct to avoid damage to the relay.

3. Contact Connection:

   • Connect the common (COM) terminal to the load or circuit being controlled.
   • Connect the normally open (NO) and normally closed (NC) terminals as required by your application.

4. Operation:

   • When the coil is energized, the NO contact will close, and the NC contact will open.
   • When the coil is de-energized, the contacts will return to their default positions.

5. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Clean the relay with a dry, soft cloth to remove dust and debris.

6. Safety:

   • Do not exceed the maximum voltage and current ratings specified.
   • Ensure proper grounding and insulation to prevent electrical shock.
   • Avoid operating the relay in environments with high humidity or corrosive gases.

(For reference only)