Details

---

BUY 2SA1671 https://www.utsource.net/itm/p/12598121.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	Vceo	-	-	45	V
Collector-Base Voltage	Vcbo	-	-	60	V
Emitter-Base Voltage	Vebo	-	-	6	V
Collector Current	Ic	-	-	3	A
Base Current	Ib	-	-	0.3	A
Power Dissipation	Ptot	-	-	65	W
Transition Frequency	Ft	-	30	-	MHz
Storage Temperature Range	Tstg	-55	-	150	掳C
Operating Temperature Range	Topr	-55	-	150	掳C

Instructions for Use:

1. Mounting and Handling:

   • Handle the 2SA1671 with care to avoid mechanical stress.
   • Ensure proper heat sinking to manage the power dissipation, especially when operating at high currents or in high-temperature environments.

2. Electrical Connections:

   • Connect the collector (C) to the positive supply voltage.
   • Connect the emitter (E) to ground or the load.
   • Connect the base (B) to the control circuit.

3. Biasing:

   • Use a suitable biasing network to ensure stable operation.
   • Ensure the base current (Ib) is within the specified limits to avoid damage.

4. Thermal Management:

   • The maximum junction temperature should not exceed 150掳C.
   • Use a heatsink if the power dissipation exceeds the free-air rating.

5. Storage and Operating Conditions:

   • Store the device in a dry environment within the storage temperature range (-55掳C to 150掳C).
   • Operate the device within the specified operating temperature range (-55掳C to 150掳C).

6. Testing:

   • Test the device under controlled conditions to verify its performance.
   • Use appropriate test equipment and methods to avoid damaging the device.

7. Safety Precautions:

   • Avoid exceeding the maximum ratings as it can lead to permanent damage.
   • Use protective gear when handling high-voltage circuits.

(For reference only)