Details

---

BUY LC89515K https://www.utsource.net/itm/p/12598156.html

Parameter	Description	Symbol	Min	Typ	Max	Unit
Supply Voltage	Operating voltage range	VDD	2.7	-	5.5	V
Standby Current	Current in standby mode	ISB	-	0.1	-	渭A
Operating Current	Typical operating current	IOP	-	1.5	-	mA
Output Current	Maximum output current per channel	IOC	-	60	-	mA
Channel-to-Channel Skew	Maximum skew between channels	Tskew	-	3	-	ns
Data Setup Time	Minimum data setup time before clock edge	tSU	10	-	-	ns
Data Hold Time	Minimum data hold time after clock edge	tH	5	-	-	ns
Clock Frequency	Maximum clock frequency	fCLK	-	-	50	MHz

Instructions for LC89515K

1. Power Supply Connection:

   • Connect the supply voltage (VDD) within the specified range of 2.7V to 5.5V.
   • Ensure a stable power supply to avoid malfunction.

2. Signal Timing:

   • Adhere to the data setup and hold times to ensure reliable data transmission.
   • The clock frequency should not exceed 50 MHz to maintain proper operation.

3. Current Handling:

   • Each channel can handle up to 60mA of current. Ensure that the load does not exceed this limit to prevent damage.
   • Consider the total power consumption when multiple channels are active simultaneously.

4. Standby Mode:

   • Utilize the low standby current feature by placing the device in standby mode during inactive periods to save power.

5. Channel Skew Management:

   • Be aware of the channel-to-channel skew of up to 3ns, which may affect timing-sensitive applications.

6. Operating Environment:

   • Ensure that the operating environment is within the recommended temperature and humidity ranges as specified in the datasheet to maintain reliability and performance.

(For reference only)