Details

---

BUY BYW51FP200 https://www.utsource.net/itm/p/12598165.html

Parameter	Symbol	Min	Typical	Max	Unit	Description
Forward Voltage	V_F	-	1.6	-	V	Voltage drop across the diode at rated current
Reverse Breakdown Voltage	V_BR	-	200	-	V	Maximum reverse voltage before breakdown
Peak Forward Current	I_FSM	-	500	-	mA	Maximum peak forward current (non-repetitive)
Average Rectified Output Current	I_F(AV)	-	100	-	mA	Continuous average forward current
Reverse Current	I_R	-	5	-	渭A	Reverse leakage current at maximum reverse voltage
Operating Junction Temperature	T_J	-40	-	125	掳C	Range of temperatures for device operation
Storage Temperature	T_STG	-55	-	150	掳C	Temperature range for storage
Thermal Resistance, Junction to Ambient	R_胃JA	-	250	-	K/W	Thermal resistance from junction to ambient

Instructions for Use:

1. Mounting and Handling:

   • Handle the BYW51FP200 with care to avoid mechanical damage.
   • Ensure that the mounting surface is clean and flat.
   • Use appropriate soldering techniques to avoid thermal shock.

2. Electrical Connections:

   • Connect the diode in the correct polarity. The cathode (K) and anode (A) should be identified on the package.
   • Ensure that the forward current does not exceed the maximum specified value (500 mA peak, 100 mA average).
   • Keep the reverse voltage within the specified limit (200 V).

3. Thermal Management:

   • Provide adequate heat sinking if the diode will operate at high currents or in high ambient temperatures.
   • Monitor the junction temperature to ensure it stays within the operating range (-40掳C to 125掳C).

4. Storage:

   • Store the diode in a dry, cool place within the specified storage temperature range (-55掳C to 150掳C).
   • Avoid exposure to corrosive environments.

5. Testing:

   • Test the diode using a multimeter or diode tester to ensure it is functioning correctly before installation.
   • Check for proper forward and reverse characteristics.

6. Safety:

   • Follow all relevant safety guidelines and regulations when handling and using the diode.
   • Use appropriate personal protective equipment (PPE) as needed.

(For reference only)