Details

---

BUY MPX5010DP https://www.utsource.net/itm/p/12598166.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating Condition	4.5	5	5.5	V
Output Voltage (0 psi)	VOUT(0)	VDD = 5V	0.3	0.5	0.7	V
Output Voltage (100 psi)	VOUT(FS)	VDD = 5V	4.3	4.5	4.7	V
Linearity Error				卤1.5%		of FS
Pressure Range			0		100	psi
Temperature Coefficient	TC		-0.02		+0.02	%/掳C
Operating Temperature			-40		+125	掳C

Instructions for MPX5010DP

1. Power Supply Connection:

   • Connect the VDD pin to a power supply that provides a voltage within the specified range (4.5V to 5.5V).
   • Ensure stable and regulated power supply to avoid output fluctuations.

2. Signal Grounding:

   • Connect the GND pin to the common ground of the system to ensure accurate readings.

3. Output Signal Handling:

   • The sensor outputs an analog voltage signal proportional to the applied pressure.
   • Use the output voltage specifications to calibrate the system accurately, especially noting the typical values at 0 psi and 100 psi.

4. Temperature Considerations:

   • Be aware of the temperature coefficient and operating temperature range to account for environmental changes affecting accuracy.
   • For applications outside the recommended temperature range, consider additional calibration or compensation methods.

5. Installation and Mounting:

   • Mount the sensor in a location where it can be exposed to the pressure media without interference.
   • Ensure that the mounting orientation does not obstruct the pressure port.

6. Handling Precautions:

   • Avoid subjecting the sensor to pressures exceeding its maximum rated pressure (100 psi) to prevent damage.
   • Handle with care to prevent mechanical shock or vibration which could affect performance.

(For reference only)