Details

---

BUY CG90L https://www.utsource.net/itm/p/12598195.html

Parameter	Description	Value
Part Number	Device Identifier	CG90L
Type	Device Type	Capacitor
Capacitance	Capacitance Value	90 pF
Tolerance	Capacitance Tolerance	卤5%
Voltage	Maximum Operating Voltage	50 VDC
Temperature	Operating Temperature Range	-55掳C to +125掳C
Case Size	Physical Size	0805 (2012 metric)
Termination	Lead Finish	Tin/Lead (SnPb)
Dielectric	Dielectric Material	NP0 (C0G)
Mounting	Mounting Style	Surface Mount
RoHS	Compliance with RoHS	Yes

Instructions for Use

1. Handling:

   • Handle the CG90L with care to avoid mechanical stress or damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage.

2. Soldering:

   • Preheat the board to 100掳C to 120掳C before soldering.
   • Use a soldering iron with a temperature of 320掳C to 350掳C.
   • Soldering time should not exceed 3 seconds per joint.
   • Allow the device to cool naturally after soldering.

3. Storage:

   • Store in a dry environment with a relative humidity of less than 60%.
   • Avoid exposure to extreme temperatures and direct sunlight.

4. Mounting:

   • Ensure the board is clean and free from contaminants.
   • Place the CG90L on the board according to the silkscreen markings.
   • Apply gentle pressure to ensure good contact with the solder pads.

5. Inspection:

   • Visually inspect the solder joints for proper wetting and absence of voids.
   • Use a multimeter to verify the capacitance value if necessary.

6. Testing:

   • Test the circuit under normal operating conditions to ensure the CG90L functions correctly.
   • Monitor the temperature and voltage levels to ensure they remain within specified limits.

7. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle whenever possible to reduce environmental impact.

(For reference only)