Details

---

BUY XC9572XL-5VQ64C https://www.utsource.net/itm/p/12598198.html

Parameter	Description	Value
Device	High-Density, Low-Cost CPLD with 72 Macrocells	XC9572XL
Package	Plastic Quad Flatpack (PQFP)	VQ64
Speed Grade	Maximum Operating Frequency	-5 (100 MHz)
Supply Voltage (Vcc)	Operating Voltage Range	3.3V ± 5%
I/O Voltage	Input/Output Voltage Range	3.3V ± 5%
I/O Banks	Number of I/O Banks	4
I/O Pins	Total Number of I/O Pins	48
Macrocells	Number of Macrocells	72
User Flash Memory	Non-Volatile User Flash Memory Size	1 Kbit
Configuration Modes	In-System Programmable (ISP) and Boundary-Scan (JTAG)	ISP, JTAG
Operating Temperature	Commercial Grade	0°C to 70°C
Storage Temperature	Storage Temperature Range	-65°C to 150°C
Power Consumption	Typical Power Consumption at Maximum Frequency and Full Utilization	100 mW
Package Pinout	Pin Configuration and Signal Assignment	Refer to Datasheet for Details
Package Dimensions	PQFP Package Dimensions	10 mm x 10 mm x 1.4 mm

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 3.3V ± 5%.
   • Connect the ground (GND) pin to a stable ground reference.

2. Configuration:

   • Use In-System Programming (ISP) or JTAG boundary-scan for device configuration.
   • Follow the programming guidelines provided in the datasheet for optimal performance.

3. Input/Output Handling:

   • All I/O pins can be configured as inputs or outputs.
   • Ensure that the I/O voltage levels are within the specified range of 3.3V ± 5%.

4. Thermal Management:

   • The device is designed to operate within the commercial temperature range of 0°C to 70°C.
   • For extended temperature ranges, refer to the industrial grade version of the device.

5. Storage and Handling:

   • Store the device in a dry environment within the temperature range of -65°C to 150°C.
   • Handle the device with care to avoid static damage. Use ESD-safe practices.

6. Pin Configuration:

   • Refer to the pinout diagram in the datasheet for specific pin assignments and functions.

7. Testing and Debugging:

   • Use boundary-scan (JTAG) for testing and debugging the device.
   • Ensure all connections are secure and correct before applying power.

For more detailed information, refer to the official datasheet and application notes provided by the manufacturer.

(For reference only)