Details

---

BUY PM100CVA120 https://www.utsource.net/itm/p/12598206.html

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage	V_IN	90	-	264	V AC
Output Voltage	V_OUT	-	12	-	V DC
Output Current	I_OUT	-	10	-	A
Efficiency	畏	-	90	-	%
Power Factor	PF	0.9	-	-	-
No-Load Power	P_NL	-	0.5	-	W
Ripple & Noise	VRMS	-	50	-	mVp-p
Operating Temperature	T_OP	-40	-	85	掳C
Storage Temperature	T_ST	-40	-	85	掳C
Humidity	RH	-	85	-	% (non-condensing)
Protection Features	-	-	Overvoltage, Overcurrent, Short Circuit, Overtemperature	-	-

Instructions for Use:

1. Installation:

   • Ensure the PM100CVA120 is installed in a well-ventilated area to prevent overheating.
   • Mount the power supply on a flat, stable surface.

2. Input Connection:

   • Connect the input terminals to a suitable AC power source within the specified voltage range (90V AC to 264V AC).
   • Use a properly rated fuse or circuit breaker to protect the input line.

3. Output Connection:

   • Connect the output terminals to the load, ensuring the polarity is correct (positive to positive, negative to negative).
   • Do not exceed the maximum output current of 10A.

4. Operation:

   • Turn on the power supply by connecting it to the AC source.
   • Monitor the output voltage and current to ensure they are within the specified limits.
   • If any protection features are activated (overvoltage, overcurrent, short circuit, overtemperature), disconnect the power supply and check the connections and load.

5. Maintenance:

   • Regularly inspect the power supply for any signs of damage or wear.
   • Clean the power supply with a dry cloth to remove dust and debris.
   • Do not use water or cleaning solvents that could damage the components.

6. Storage:

   • Store the power supply in a dry, cool place away from direct sunlight and extreme temperatures.
   • Ensure the storage environment has a humidity level below 85% to prevent corrosion.

7. Safety Precautions:

   • Always disconnect the power supply from the AC source before performing any maintenance or repairs.
   • Do not modify the power supply or its components.
   • Follow all local electrical codes and regulations when installing and using the power supply.

(For reference only)