Details

---

BUY STP75NF75 https://www.utsource.net/itm/p/12598213.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Drain-Source Voltage	VDS	-75	-	75	V
Gate-Source Voltage	VGS	-20	-	20	V
Continuous Drain Current	ID	-	75	-	A	TC = 25掳C
Pulse Drain Current	ID(peak)	-	150	-	A	TC = 25掳C, tp = 10 渭s
Power Dissipation	PD	-	-	300	W	TC = 25掳C
Junction Temperature	TJ	-	-	175	掳C
Storage Temperature	TSTG	-55	-	150	掳C
Thermal Resistance, Junction to Case	Rth(j-c)	-	0.4	-	掳C/W
Gate Charge	QG	-	96	-	nC	VGS = 10V, ID = 75A
Input Capacitance	Ciss	-	3800	-	pF	VDS = 75V, f = 1 MHz
Output Capacitance	Coss	-	130	-	pF	VDS = 75V, f = 1 MHz
Reverse Transfer Capacitance	Crss	-	200	-	pF	VDS = 75V, f = 1 MHz
On-State Resistance	RDS(on)	-	0.015	-	惟	VGS = 10V, ID = 75A
Gate Threshold Voltage	VGS(th)	2.0	2.5	3.0	V	ID = 1 mA

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to manage power dissipation.
   • Handle with care to avoid damage to the gate terminal, which is sensitive to electrostatic discharge (ESD).

2. Biasing:

   • Apply the gate-source voltage (V_GS) within the specified limits to ensure reliable operation.
   • Use appropriate gate drive circuits to minimize switching losses.

3. Thermal Management:

   • Monitor the junction temperature (T_J) to prevent overheating.
   • Use thermal paste between the device and heat sink for efficient heat transfer.

4. Operating Conditions:

   • Ensure that the drain-source voltage (V_DS) does not exceed the maximum rating.
   • Operate within the continuous and pulse current ratings to avoid damage.

5. Storage:

   • Store the device in a dry, cool environment to prevent moisture damage.
   • Follow ESD precautions during storage and handling.

6. Testing:

   • Use appropriate test equipment and methods to verify the device parameters.
   • Refer to the datasheet for specific test conditions and procedures.

7. Applications:

   • Suitable for high-power switching applications such as motor control, power supplies, and inverters.
   • Ensure the device is used within its safe operating area (SOA) to avoid failure.

(For reference only)