Details

---

BUY AOD7S65 https://www.utsource.net/itm/p/12598230.html

Parameter	Symbol	Min	Typ	Max	Unit
Drain-Source Voltage	VDS	-60	-	60	V
Gate-Source Voltage	VGS	-12	-	12	V
Continuous Drain Current	ID	-	4.5	6.5	A
Pulse Drain Current	ID(pulse)	-	9	13	A
RDS(on) at VGS=10V	-	-	0.055	0.085	惟
RDS(on) at VGS=4.5V	-	-	0.085	0.125	惟
Total Gate Charge	QG	-	32	45	nC
Input Capacitance	Ciss	-	110	170	pF
Output Capacitance	Coss	-	30	45	pF
Reverse Transfer Capacitance	Crss	-	20	30	pF
Junction Temperature	TJ	-55	-	150	掳C

Instructions for Use:

1. Voltage Ratings:

   • Ensure that the drain-source voltage (V_DS) does not exceed 卤60V.
   • The gate-source voltage (V_GS) should be kept within 卤12V to avoid damage to the device.

2. Current Ratings:

   • The continuous drain current (I_D) should not exceed 6.5A.
   • For pulse applications, the peak drain current (I_D(pulse)) can go up to 13A, but ensure proper thermal management to prevent overheating.

3. On-Resistance (R_DS(on)):

   • At V_GS = 10V, the on-resistance is typically 0.055惟 to 0.085惟.
   • At V_GS = 4.5V, the on-resistance increases to 0.085惟 to 0.125惟. Ensure adequate V_GS for low resistance operation.

4. Capacitance:

   • Input capacitance (C_iss) is typically 110pF to 170pF.
   • Output capacitance (C_oss) is typically 30pF to 45pF.
   • Reverse transfer capacitance (C_rss) is typically 20pF to 30pF. These values affect switching performance and should be considered in circuit design.

5. Thermal Management:

   • The junction temperature (T_J) should be kept between -55掳C and 150掳C.
   • Proper heat sinking or cooling mechanisms may be required to manage heat dissipation, especially in high-power applications.

6. Handling Precautions:

   • The device is sensitive to electrostatic discharge (ESD). Handle with care and use ESD protection measures.
   • Avoid mechanical stress on the leads and body of the device during soldering and handling.

7. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat.
   • Follow recommended storage conditions to ensure long-term reliability.

(For reference only)