Details

---

BUY 2SC3262 https://www.utsource.net/itm/p/12598247.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	Vceo	-	-	40	V
Collector-Base Voltage	Vcbo	-	-	45	V
Emitter-Base Voltage	Vebo	-	-	5	V
Collector Current	Ic	-	-	1.5	A
Base Current	Ib	-	-	0.15	A
Power Dissipation	Ptot	-	-	65	W
Transition Frequency	Ft	-	180	-	MHz
Storage Temperature Range	Tstg	-55	-	150	掳C
Operating Temperature Range	Topr	-55	-	150	掳C

Instructions for Use:

1. Handling:

   • Handle the 2SC3262 with care to avoid damage to the leads and the body.
   • Use proper anti-static precautions to prevent damage from electrostatic discharge (ESD).

2. Mounting:

   • Ensure that the mounting surface is clean and flat.
   • Apply thermal compound between the transistor and the heat sink to improve thermal conductivity.
   • Tighten the mounting screws to the recommended torque to ensure good thermal contact without damaging the transistor.

3. Biasing:

   • Set the base current (Ib) to ensure the transistor operates within its safe operating area (SOA).
   • Use appropriate biasing circuits to maintain stable operation over temperature variations.

4. Thermal Management:

   • Monitor the junction temperature (Tj) to ensure it does not exceed the maximum rating.
   • Use a suitable heat sink to dissipate the power generated by the transistor.

5. Testing:

   • Test the transistor using a multimeter or a dedicated transistor tester to verify its functionality.
   • Check for short circuits and open circuits in the leads.

6. Storage:

   • Store the 2SC3262 in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the transistors in their original packaging until ready for use to protect them from static and physical damage.

(For reference only)