Details

---

BUY RTL8110SCL https://www.utsource.net/itm/p/12598396.html

Parameter	Description	Value / Range
Package	The type of package used for the chip	QFN-24
Operating Voltage (Vcc)	The voltage range at which the device can operate	3.3V ± 5%
Operating Temperature	The temperature range within which the device can function properly	-40°C to +85°C
Data Rate	Maximum data transfer rate supported by the device	10/100/1000 Mbps
Interface	Type of interface used for communication	PCI Express Gen1 x1
MAC Address	Unique identifier for the network interface	6-byte IEEE 802.3 compliant address
Wake-on-LAN	Support for Wake-on-LAN functionality	Yes
Jumbo Frame	Support for large frame sizes	Up to 9014 bytes
Power Consumption	Typical power consumption in active mode	< 350 mW (1000 Mbps)
Standby Power	Power consumption in standby mode	< 2 mW
ESD Protection	Electrostatic discharge protection	±4 kV (Human Body Model)
MTU	Maximum Transmission Unit	1500 bytes (default)
Flow Control	Support for flow control mechanisms	802.3x Full-Duplex Flow Control
LED Indicators	Number and type of LEDs for status indication	Link/Activity, Speed, 1000Mbps, 100Mbps
Compliance	Standards and certifications met by the device	RoHS, CE, FCC, EMI/EMC

Instructions for Use:

1. Power Supply:

   • Ensure that the supply voltage is within the specified range (3.3V ± 5%).
   • Connect the power supply to the Vcc and GND pins as indicated in the datasheet.

2. Installation:

   • Insert the RTL8110SCL into the appropriate socket on the motherboard.
   • Secure the device with the provided mounting hardware.

3. Configuration:

   • Use the BIOS or operating system settings to configure the network interface.
   • Set the MAC address if necessary.
   • Enable Wake-on-LAN if required.

4. Firmware Update:

   • Check the manufacturer’s website for the latest firmware updates.
   • Follow the provided instructions to update the firmware.

5. Testing:

   • Connect the device to a network using a standard Ethernet cable.
   • Verify the connection status using the LED indicators.
   • Test the network performance using tools like ping, iperf, or similar.

6. Troubleshooting:

   • If the device does not function correctly, check the power supply and connections.
   • Refer to the troubleshooting section in the datasheet for common issues and solutions.

7. Maintenance:

   • Keep the device clean and free from dust.
   • Avoid exposing the device to extreme temperatures or humidity.
   • Regularly check for firmware updates and apply them as needed.

(For reference only)