Details

---

BUY SOMC1601-222G https://www.utsource.net/itm/p/12598399.html

Parameter	Description	Value
Part Number	Unique identifier for the component	SOMC1601-222G
Type	Type of component	Capacitor
Capacitance	Amount of electrical charge stored	220 pF
Voltage Rating (DC)	Maximum continuous operating voltage (DC)	50 V
Tolerance	Allowed deviation from the nominal capacitance	卤5%
Temperature Coefficient	Change in capacitance with temperature	NPO (0 ppm/掳C)
Operating Temperature Range	Range of temperatures over which the component can operate safely	-55掳C to +125掳C
Case Size	Physical dimensions of the component	0402 (1.0 x 0.5 mm)
Termination	Type of termination on the component	SMD (Surface Mount)
Packaging	Method of packaging the components	Tape & Reel
RoHS Compliance	Compliance with Restriction of Hazardous Substances directive	Yes
Lead-Free	Whether the component is lead-free	Yes

Instructions for Use:

1. Handling: Handle the component with care to avoid damage. Use appropriate ESD (Electrostatic Discharge) protection when handling.
2. Mounting: Place the component on the PCB (Printed Circuit Board) as per the design layout. Ensure proper alignment and orientation.
3. Soldering: Use a reflow soldering process suitable for SMD components. The recommended reflow profile should have a peak temperature of 240掳C to 260掳C for a duration of 10 to 20 seconds.
4. Inspection: After soldering, inspect the component for proper solder joints and ensure there are no shorts or open circuits.
5. Storage: Store the components in a dry, cool place away from direct sunlight and sources of heat. Use desiccant packets if storing for extended periods.
6. Testing: Test the assembled PCB to ensure the capacitor is functioning correctly within the specified parameters.

For detailed technical specifications and further information, refer to the datasheet provided by the manufacturer.

(For reference only)