Details

---

BUY SIM1-2424S https://www.utsource.net/itm/p/12598400.html

Parameter	Value	Unit
Input Voltage	18 - 36	VDC
Output Voltage	24	VDC
Output Current	24	A
Efficiency	Up to 94%	%
Operating Temperature	-40 to +85	掳C
Storage Temperature	-40 to +125	掳C
Protection Features	Overvoltage, Overcurrent, Short Circuit	-
Input Ripple Rejection	60 dB (100 kHz)	dB
Output Ripple	< 50 mV	mV
Dimensions	76.2 x 50.8 x 12.7	mm
Weight	150	g

Instructions for Use

1. Installation:

   • Ensure the input voltage is within the specified range (18-36 VDC).
   • Connect the positive terminal of the power supply to the input positive terminal of the SIM1-2424S.
   • Connect the negative terminal of the power supply to the input negative terminal of the SIM1-2424S.
   • Connect the load to the output terminals of the SIM1-2424S.

2. Operation:

   • Turn on the power supply and check the output voltage using a multimeter to ensure it is 24 VDC.
   • Monitor the temperature to ensure it stays within the operating range (-40 to +85掳C).

3. Protection:

   • The module includes overvoltage, overcurrent, and short-circuit protection. If any of these conditions occur, the module will automatically shut down to prevent damage.
   • After the fault condition is resolved, the module will automatically resume operation.

4. Maintenance:

   • Regularly inspect the connections for any signs of wear or damage.
   • Ensure the module is installed in a well-ventilated area to prevent overheating.

5. Storage:

   • Store the module in a dry, cool place with temperatures between -40掳C and +125掳C.

6. Troubleshooting:

   • No Output Voltage: Check input voltage and connections.
   • Overheating: Ensure proper ventilation and check for excessive load.
   • Output Ripple Exceeds 50 mV: Check input ripple and filter capacitors.

(For reference only)