Details

---

BUY ACJ1212 https://www.utsource.net/itm/p/12598409.html

Parameter	Description	Value	Unit
Part Number	Device Identifier	ACJ1212	-
Type	Component Type	Phototransistor	-
Emitter Wavelength	Peak Emission Wavelength	850	nm
Collector Current	Maximum Collector Current	50	mA
Reverse Voltage	Maximum Reverse Voltage	30	V
Forward Current	Maximum Forward Current	100	mA
Operating Temperature	Operating Temperature Range	-40 to +85	°C
Storage Temperature	Storage Temperature Range	-40 to +100	°C
Package	Package Type	TO-46	-
Lead Pitch	Distance Between Leads	2.54	mm
Lead Length	Length of Each Lead	3.0	mm
Lead Diameter	Diameter of Each Lead	0.6	mm
Mounting Type	Mounting Method	Through-Hole	-

Instructions for Use:

1. Handling Precautions:

   • Handle the ACJ1212 with care to avoid physical damage.
   • Use appropriate ESD (Electrostatic Discharge) protection measures when handling the device.

2. Soldering:

   • Preheat the device to 125°C for 1 minute before soldering.
   • Soldering temperature should not exceed 300°C.
   • Soldering time should not exceed 5 seconds per joint.

3. Mounting:

   • Ensure the leads are properly aligned with the PCB holes.
   • Apply gentle pressure to seat the device firmly on the PCB.
   • Avoid excessive bending of the leads, as this can cause mechanical stress.

4. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Keep the device in its original packaging until ready for use.

5. Operating Conditions:

   • Ensure the operating temperature is within the specified range (-40°C to +85°C).
   • Do not exceed the maximum collector current (50 mA) or reverse voltage (30 V).

6. Testing:

   • Use a multimeter to verify the continuity and resistance of the leads before and after installation.
   • Test the device under normal operating conditions to ensure proper functionality.

7. Disposal:

   • Dispose of the device according to local environmental regulations.
   • Recycle electronic components whenever possible.

(For reference only)