Details

---

BUY PQ200WNA1 https://www.utsource.net/itm/p/12598577.html

Parameter	Description	Value
Part Number	PQ200WNA1	-
Type	Power Supply Module	-
Input Voltage Range	AC Input Voltage	90-264VAC
Frequency Range	Input Frequency	47-63Hz
Output Voltage	DC Output Voltage	24VDC
Output Current	Maximum Output Current	8.33A
Output Power	Maximum Output Power	200W
Efficiency	Typical Efficiency at Full Load	>90%
Protection Features	Overvoltage Protection (OVP), Overcurrent Protection (OCP), Short Circuit Protection (SCP)	Yes
Operating Temperature	Ambient Operating Temperature Range	-20掳C to +70掳C
Storage Temperature	Storage Temperature Range	-40掳C to +85掳C
Humidity	Relative Humidity Range	0% to 95% (Non-condensing)
Dimensions	Width x Height x Depth	100mm x 50mm x 120mm
Weight	Approximate Weight	0.8kg
Certifications	Safety and Compliance Certifications	CE, UL, TUV

Instructions for Use

1. Installation:

   • Ensure the power supply module is installed in a well-ventilated area to prevent overheating.
   • Mount the module on a flat, stable surface using the provided mounting holes.

2. Connection:

   • Connect the input AC power to the terminals marked "L" (Line) and "N" (Neutral).
   • Connect the output DC load to the terminals marked "+" (Positive) and "-" (Negative).

3. Operation:

   • Turn on the power supply by connecting it to the AC mains.
   • Monitor the output voltage and current to ensure they are within the specified limits.
   • If the power supply is used in a high-temperature environment, ensure adequate cooling is provided.

4. Maintenance:

   • Regularly inspect the connections for any signs of wear or damage.
   • Clean the module with a dry cloth to remove dust and debris.
   • Do not disassemble the power supply module as it may void the warranty and pose a safety risk.

5. Troubleshooting:

   • If the power supply does not turn on, check the input voltage and connections.
   • If the output voltage is incorrect, verify the load and connections.
   • If the power supply trips frequently, check for overvoltage, overcurrent, or short circuit conditions.

6. Safety Precautions:

   • Always disconnect the power supply from the mains before performing any maintenance or repairs.
   • Do not expose the power supply to water or other liquids.
   • Do not operate the power supply in environments with explosive gases or dust.
   • Follow all local electrical codes and regulations when installing and using the power supply.

(For reference only)