Details

---

BUY 74HCT153N https://www.utsource.net/itm/p/12598599.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	2.0	-	6.0	V
Input Low Voltage	VIL	-	0.8	-	V
Input High Voltage	VIH	-	2.0	-	V
Output Low Voltage	VOL	-	0.1	0.4	V
Output High Voltage	VOH	2.4	-	-	V
Input Leakage Current	IIL	-1.0	-	1.0	渭A
Output Leakage Current	IOL	-	0.1	-	渭A
Propagation Delay Time (Typ)	tpd	-	18	-	ns
Power Dissipation	Ptot	-	-	100	mW

Instructions for Using 74HCT153N:

1. Power Supply:

   • Connect V_CC to the positive supply voltage (2.0V to 6.0V).
   • Connect GND to the ground.

2. Input Signals:

   • Ensure input signals are within the specified range:
     • Low: 0.8V or less
     • High: 2.0V or more

3. Output Signals:

   • The output will be:
     • Low: 0.1V to 0.4V
     • High: 2.4V or more

4. Propagation Delay:

   • The typical propagation delay time is 18ns. This is the time it takes for the output to change state after the input changes.

5. Current Considerations:

   • Input leakage current should not exceed 卤1.0渭A.
   • Output leakage current should not exceed 0.1渭A.

6. Power Dissipation:

   • Ensure that the total power dissipation does not exceed 100mW to avoid overheating.

7. Handling:

   • Handle the IC with care to avoid static damage. Use proper ESD protection when handling.

8. Storage:

   • Store in a dry, cool place to prevent moisture damage.

9. Mounting:

   • Follow standard surface mount or through-hole mounting procedures as per your PCB design.

10. Testing:

    • Before final assembly, test the IC on a breadboard or test circuit to ensure it meets the required specifications.

(For reference only)