Details

---

BUY RJP63K2 https://www.utsource.net/itm/p/12598613.html

Below is the parameter table and instructions for the RJP63K2 relay:

Parameter Table

Parameter	Symbol	Value	Unit
Rated Coil Voltage	VCC	5, 12, 24	V
Coil Resistance	RCC	75, 200, 400	惟
Operating Current	ICC	66.7, 25, 12.5	mA
Operating Power	PCC	0.33, 0.3, 0.3	W
Contact Form	-	SPDT	-
Maximum Switching Voltage	VSW	30	VDC
Maximum Switching Current	ISW	1	A
Contact Resistance	RC	50	m惟
Insulation Resistance	RI	100	M惟
Dielectric Strength	VDS	1000	VAC (RMS)
Mechanical Life	NM	100,000	Cycles
Electrical Life	NE	10,000	Cycles
Operating Temperature	TOP	-40 to +85	掳C
Storage Temperature	TST	-40 to +125	掳C
Dimensions	-	17.5 x 12.5 x 10.2	mm

Instructions

1. Coil Connection:

   • Connect the coil terminals to the appropriate voltage source as specified by the rated coil voltage.
   • Ensure the polarity is correct to avoid damage.

2. Contact Connection:

   • The relay has a single-pole double-throw (SPDT) configuration with common (COM), normally open (NO), and normally closed (NC) contacts.
   • Connect the load between the COM and NO/NC contacts as required.

3. Operating Voltage:

   • Apply the rated coil voltage to operate the relay. Overvoltage can cause damage, while undervoltage may result in unreliable operation.

4. Switching Capacity:

   • Do not exceed the maximum switching voltage and current ratings to prevent damage to the contacts.

5. Environmental Conditions:

   • Operate the relay within the specified temperature range to ensure reliable performance.
   • Store the relay in a dry environment within the storage temperature range.

6. Installation:

   • Mount the relay on a flat, stable surface.
   • Ensure proper ventilation to dissipate heat generated during operation.

7. Testing:

   • Test the relay before installation to verify proper operation.
   • Use a multimeter to check the continuity of the contacts and the resistance of the coil.

8. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Replace the relay if it fails to operate correctly or shows signs of physical damage.

9. Disposal:

   • Dispose of the relay in accordance with local environmental regulations.

By following these parameters and instructions, you can ensure the reliable and safe operation of the RJP63K2 relay.

(For reference only)