Details

---

BUY SKKT162/16E https://www.utsource.net/itm/p/12598618.html

Parameter	Description	Value	Unit
Type	Thyristor	-	-
Part Number	Model	SKKT162/16E	-
Maximum Repetitive Peak Off-State Voltage (VDRM)	Maximum voltage that can be applied in the off state without conduction	1600	V
Maximum Repetitive Peak On-State Current (ITRM)	Maximum current that can flow in the on state without damage	16	A
Maximum RMS On-State Current (IT(RMS))	Maximum continuous RMS current	16	A
Maximum Gate Trigger Current (IGT)	Minimum gate current required to turn on the thyristor	50	mA
Maximum Gate Trigger Voltage (VGT)	Minimum gate voltage required to turn on the thyristor	1.5	V
Maximum Junction Temperature (TJ(max))	Maximum temperature the junction can withstand	125	°C
Storage Temperature Range (TSTG)	Temperature range for storage	-40 to 125	°C
Case Style	Package type	TO-220	-
Mounting Type	Installation method	Through-hole	-

Instructions for Use:

1. Mounting:

   • Ensure the mounting surface is clean and flat.
   • Use a heat sink if necessary to dissipate heat, especially for high current applications.
   • Tighten the mounting screw to the recommended torque to avoid overheating.

2. Electrical Connections:

   • Connect the anode (A) and cathode (K) terminals correctly to the load circuit.
   • Apply the gate trigger signal (G) with respect to the cathode (K).
   • Ensure the gate trigger current (IGT) and voltage (VGT) are within the specified limits.

3. Operating Conditions:

   • Do not exceed the maximum repetitive peak off-state voltage (VDRM) or the maximum RMS on-state current (IT(RMS)).
   • Monitor the junction temperature (TJ) to ensure it does not exceed the maximum limit.
   • Use appropriate cooling methods to maintain the device within its operational temperature range.

4. Storage:

   • Store the device in a dry, cool place within the specified storage temperature range (TSTG).

5. Handling:

   • Handle the device with care to avoid mechanical damage.
   • Use proper ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

6. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Refer to the datasheet for detailed testing procedures and guidelines.

(For reference only)