Details

---

BUY P6SMB15A-E3/5B https://www.utsource.net/itm/p/12599460.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Rated Voltage	VRRM	-	15	-	V
Maximum Repetitive Peak Reverse Voltage	VRRM	-	15	-	V
Maximum RMS Voltage	VRMS	-	10.6	-	V
Maximum DC Blocking Voltage	VB	-	15	-	V
Maximum Average Rectified Forward Current (Tamb=25掳C)	IF(AV)	-	6.0	-	A
Maximum Average Rectified Forward Current (Tamb=75掳C)	IF(AV)	-	3.0	-	A
Non-Repetitive Peak Surge Current (8.3ms single half sine-wave, TJ=25掳C)	IFSM	-	120	-	A
Non-Repetitive Peak Surge Current (8.3ms single half sine-wave, TJ=100掳C)	IFSM	-	84	-	A
Forward Voltage at IF = 1.0A	VF	0.9	-	1.2	V
Reverse Leakage Current at VR = 15V, TJ = 25掳C	IR	-	100	-	渭A
Reverse Leakage Current at VR = 15V, TJ = 125掳C	IR	-	500	-	渭A
Junction Temperature	TJ	-40	-	150	掳C
Storage Temperature	TSTG	-55	-	150	掳C
Operating Temperature	TOPR	-40	-	125	掳C
Thermal Resistance, Junction to Ambient	R胃JA	-	40	-	掳C/W
Thermal Resistance, Junction to Case	R胃JC	-	3.0	-	掳C/W

Instructions for Use:

1. Mounting:

   • Ensure proper heat dissipation by mounting the device on a heatsink if necessary.
   • Follow the recommended PCB layout guidelines to minimize thermal resistance.

2. Electrical Connections:

   • Connect the anode and cathode terminals correctly to avoid reverse breakdown.
   • Use appropriate wire gauge and connectors to handle the maximum current ratings.

3. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed 150掳C.
   • If operating in high ambient temperatures, consider additional cooling measures.

4. Surge Handling:

   • The device can handle surge currents up to 120A for short durations (8.3ms single half sine-wave).
   • Ensure that the surge conditions do not exceed these limits to prevent damage.

5. Storage:

   • Store the device in a dry, cool environment within the storage temperature range (-55掳C to 150掳C).

6. Handling:

   • Handle the device with care to avoid mechanical stress or damage.
   • Use ESD protection when handling to prevent electrostatic discharge damage.

7. Testing:

   • Perform initial testing under controlled conditions to verify performance and reliability.
   • Regularly inspect the device for signs of wear or damage during operation.

(For reference only)