Details

---

BUY AD8512ARMZ-REEL https://www.utsource.net/itm/p/12599506.html

Parameter	Description	Value
Product Number	AD8512ARMZ-REEL	-
Package Type	SOIC (Small Outline Integrated Circuit)	8-Pin SOIC
Operating Temperature	Range of temperatures over which the device is guaranteed to operate	-40掳C to +125掳C
Supply Voltage	Range of supply voltages that can be used	2.7V to 5.5V
Quiescent Current	Current consumed by the device when no load is applied	120 渭A per amplifier
Input Bias Current	Average current flowing into the input terminals	卤2 pA
Input Offset Voltage	Difference in voltage between the two input terminals	卤100 渭V
Slew Rate	Rate at which the output voltage changes in response to a step input	0.5 V/渭s
Bandwidth	Frequency range over which the amplifier operates with minimal distortion	1.6 MHz
Output Voltage Swing	Range of output voltage swing	卤1.3V from supply rails
Common Mode Input Range	Range of common-mode voltages that can be applied to the inputs	VSS - 0.1V to VDD - 0.1V
Output Current	Maximum current the output can source or sink	卤10 mA
Storage Temperature	Range of temperatures over which the device can be stored without damage	-65掳C to +150掳C
Lead Finish	Surface finish of the leads	Matte Tin

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range (2.7V to 5.5V).
   • Connect the positive supply (V_DD) to pin 8 and the negative supply (V_SS) to pin 4.

2. Input Connections:

   • Connect the non-inverting input (pin 3) and inverting input (pin 2) to your signal sources.
   • For the second amplifier, connect the non-inverting input (pin 5) and inverting input (pin 6).

3. Output Connections:

   • The output of the first amplifier is on pin 1.
   • The output of the second amplifier is on pin 7.

4. Grounding:

   • Ensure proper grounding to minimize noise and interference. Connect the ground (GND) to pin 4 if using a single supply configuration.

5. Decoupling Capacitors:

   • Place decoupling capacitors (typically 0.1 渭F) close to the power supply pins to filter out noise and stabilize the supply voltage.

6. Thermal Management:

   • Ensure adequate heat dissipation if operating at high temperatures or high power levels. Consider using a heatsink if necessary.

7. Handling:

   • Handle the device with care to avoid damage to the leads and the internal circuitry.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

8. Storage:

   • Store the device in a dry, cool place within the specified storage temperature range (-65掳C to +150掳C).

For detailed application notes and further information, refer to the datasheet provided by Analog Devices.

(For reference only)