Details

---

BUY MD6752 https://www.utsource.net/itm/p/12599510.html

Below is the parameter table and instructions for the MD6752 IC:

MD6752 Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit
Input Voltage	VIN	3.0	-	5.5	V
Output Voltage	VOUT	-	1.8	-	V
Output Current	IOUT	-	1.5	2.0	A
Quiescent Current	IQ	-	1.0	2.0	渭A
Dropout Voltage	VDROP	-	0.2	0.4	V
Shutdown Current	ISD	-	0.1	0.5	渭A
Operating Temperature	TOP	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C

Instructions for MD6752

1. Power Supply Connection:

   • Connect the input voltage (V_IN) to the VIN pin.
   • Ensure the input voltage is within the specified range (3.0V to 5.5V).

2. Output Configuration:

   • The output voltage (V_OUT) is fixed at 1.8V. No external resistors are required for voltage setting.

3. Load Connection:

   • Connect the load to the V_OUT pin.
   • Ensure the load current does not exceed the maximum output current (2.0A).

4. Ground Connection:

   • Connect the ground (GND) pin to the system ground.

5. Shutdown Function:

   • To enable the shutdown function, connect the SHDN pin to GND or apply a low logic level.
   • To keep the device active, apply a high logic level to the SHDN pin or leave it floating.

6. Capacitor Selection:

   • Use a 1渭F ceramic capacitor between VIN and GND for input filtering.
   • Use a 1渭F ceramic capacitor between V_OUT and GND for output filtering.

7. Thermal Considerations:

   • Ensure adequate heat dissipation if operating at high output currents.
   • The device can operate up to 85掳C ambient temperature under normal conditions.

8. Storage and Handling:

   • Store the device in a dry environment.
   • Handle with care to avoid static damage.

9. Package Information:

   • The MD6752 is available in SOT-23-5 package.

By following these instructions, you can ensure optimal performance and reliability of the MD6752 IC in your application.

(For reference only)