Details

---

BUY CD4053BE https://www.utsource.net/itm/p/12599512.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD		-0.5		18	V
Input Voltage Range	VI		0		VDD	V
Output Voltage Range	VO		0		VDD	V
Control Voltage Range	VC		0		VDD	V
Leakage Current (Input/Output)	ILK	VDD = 15V, VI/VO = 0V or VDD		1		nA
On-State Resistance	RON	VDD = 15V, VI/VO = 0V or VDD		125		惟
Off-State Resistance	ROFF	VDD = 15V, VI/VO = 0V or VDD		10^6		惟
Propagation Delay Time	tpd	VDD = 15V, VI/VO = 0V or VDD		10		ns
Power Dissipation	PD	TA = 25掳C			100	mW
Operating Temperature Range	TOPR		-40		85	掳C
Storage Temperature Range	TSTG		-65		150	掳C

Instructions for Using the CD4053BE

1. Supply Voltage (V_DD):

   • Ensure the supply voltage is within the range of 0 to 18V.
   • Avoid exceeding the maximum voltage to prevent damage to the device.

2. Input and Output Voltage (V_I, V_O):

   • The input and output voltages should be within the range of 0 to V_DD.
   • Ensure that the signals do not exceed the supply voltage to avoid damage.

3. Control Voltage (V_C):

   • The control voltage should also be within the range of 0 to V_DD.
   • Use this voltage to control the switching of the analog switches.

4. Leakage Current (I_LK):

   • The leakage current is typically very low (1 nA at V_DD = 15V).
   • This can be ignored in most applications but should be considered in high-precision circuits.

5. On-State Resistance (R_ON):

   • The on-state resistance is typically 125 惟 at V_DD = 15V.
   • This resistance can affect the signal integrity in high-frequency applications.

6. Off-State Resistance (R_OFF):

   • The off-state resistance is typically 1 M惟 at V_DD = 15V.
   • This high resistance ensures good isolation when the switch is off.

7. Propagation Delay Time (t_pd):

   • The propagation delay time is typically 10 ns at V_DD = 15V.
   • This is important for timing considerations in digital circuits.

8. Power Dissipation (P_D):

   • The maximum power dissipation is 100 mW at 25掳C ambient temperature.
   • Ensure proper heat dissipation if operating near the maximum power.

9. Operating Temperature Range (T_OPR):

   • The device can operate from -40掳C to 85掳C.
   • Ensure the ambient temperature does not exceed these limits.

10. Storage Temperature Range (T_STG):

    • The device can be stored from -65掳C to 150掳C.
    • Store the device in a dry and temperature-controlled environment to ensure longevity.

Additional Notes:

• Always refer to the datasheet for the most accurate and detailed information.
• Proper decoupling capacitors should be used to stabilize the supply voltage and reduce noise.
• Ensure all connections are secure and free from shorts or open circuits.

(For reference only)