Details

---

BUY SR5100 https://www.utsource.net/itm/p/12599540.html

Parameter	Description
Part Number	SR5100
Type	Surface Mount Resistor
Resistance	5.1 k惟 卤 1%
Power Rating	0.125 W (1/8 W)
Tolerance	卤1%
Temperature Coefficient	100 ppm/掳C
Operating Temperature Range	-55掳C to +125掳C
Package	0805 (2012 Metric)
Material	Thick Film
Mounting Type	Surface Mount
RoHS Compliance	Yes
Lead-Free	Yes

Instructions for Use:

1. Handling:

   • Handle with care to avoid damage to the component.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

2. Soldering:

   • Preheat the PCB to 100掳C to 120掳C before soldering.
   • Use a soldering iron with a temperature setting between 300掳C and 350掳C.
   • Apply solder to the pads and not directly to the resistor.
   • Ensure the solder joints are smooth and free of voids or cold solder joints.
   • Allow the component to cool naturally after soldering.

3. Inspection:

   • Visually inspect the solder joints for proper wetting and alignment.
   • Check for any signs of damage or overheating on the resistor body.

4. Testing:

   • Use a multimeter to verify the resistance value is within the specified tolerance.
   • Ensure the component is properly connected in the circuit and functions as expected.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to protect from moisture and static.

6. Disposal:

   • Dispose of the component according to local regulations for electronic waste.

(For reference only)