Details

---

BUY UPD41464C-10 https://www.utsource.net/itm/p/12599543.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VDD)	Operating voltage range	2.7	-	5.5	V
Output Current (IOH)	Output high-level current	-	-	30	mA
Output Current (IOL)	Output low-level current	-100	-	-	mA
Operating Temperature (TA)	Ambient temperature range	-40	-	85	掳C
Storage Temperature (TSTG)	Storage temperature range	-65	-	150	掳C
Input Voltage (VIH)	High-level input voltage	2.0	-	5.5	V
Input Voltage (VIL)	Low-level input voltage	0.0	-	0.8	V
Propagation Delay Time (tPD)	Propagation delay time	-	15	50	ns
Power Consumption (ICC)	Typical power consumption at 5V	-	10	-	mA

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
   • Connect a stable power supply to avoid voltage fluctuations that can affect performance.

2. Output Current:

   • The output high-level current (IOH) should not exceed 30mA.
   • The output low-level current (IOL) should not be less than -100mA.
   • Ensure that the load connected to the output does not exceed these limits to prevent damage.

3. Temperature Range:

   • The device is designed to operate within an ambient temperature range of -40掳C to 85掳C.
   • Store the device in a temperature range of -65掳C to 150掳C to ensure long-term reliability.

4. Input Voltage Levels:

   • High-level input voltage (VIH) should be between 2.0V and 5.5V.
   • Low-level input voltage (VIL) should be between 0.0V and 0.8V.
   • Ensure that the input signals are within these ranges to avoid incorrect operation.

5. Propagation Delay:

   • The typical propagation delay time (tPD) is 15ns with a maximum of 50ns.
   • Consider this delay when designing timing-critical applications.

6. Power Consumption:

   • The typical power consumption at 5V is 10mA.
   • Ensure that the power supply can handle the total power consumption of the device and any other components in the circuit.

7. Handling and Storage:

   • Handle the device with care to avoid static damage.
   • Store the device in a dry, cool place to prevent moisture damage.

8. Schematic Design:

   • Follow the recommended layout guidelines to ensure optimal performance.
   • Use decoupling capacitors near the power pins to reduce noise and improve stability.

9. Testing:

   • Test the device under typical operating conditions to verify its functionality.
   • Use appropriate test equipment to measure parameters such as output current, input voltage levels, and propagation delay.

By following these instructions, you can ensure reliable and efficient operation of the UPD41464C-10.

(For reference only)