Details

---

BUY SN75176BDR https://www.utsource.net/itm/p/12599559.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	4.75	5.0	5.25	V
Differential Input Voltage	VID	Continuous	-10	0	+10	V
Common-Mode Input Voltage	VICM	Continuous	-7	0	+12	V
Output Short-Circuit Current	ISC	VCC = 5V, TA = 25掳C	-	100	-	mA
Output High-Level Voltage	VOH	IOL = 4mA, VCC = 5V	2.4	-	3.6	V
Output Low-Level Voltage	VOL	IOH = -4mA, VCC = 5V	0.4	-	0.6	V
Driver Enable Input High-Level Voltage	VIH	Input Current 1 渭A	2.0	-	5.5	V
Driver Enable Input Low-Level Voltage	VIL	Input Current 1 渭A	0.8	-	2.0	V
Driver Enable Input Leakage Current	IIL	VIN = 0V to VCC	-1	0	1	渭A
Differential Output Voltage (High)	VODH	VCC = 5V, RL = 100惟	2.0	-	2.5	V
Differential Output Voltage (Low)	VODL	VCC = 5V, RL = 100惟	-2.5	-	-2.0	V
Propagation Delay Time	tpd	VCC = 5V, TA = 25掳C	15	25	40	ns
Skew	tskew	VCC = 5V, TA = 25掳C	-	5	-	ns
Operating Temperature Range	TA	-	-40	-	85	掳C
Storage Temperature Range	TSTG	-	-65	-	150	掳C

Instructions for Using SN75176BDR:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.75V to 5.25V.
   • Use a stable power supply to avoid voltage fluctuations that can affect performance.

2. Input Signals:

   • The differential input voltage (V_ID) should not exceed 卤10V to prevent damage.
   • The common-mode input voltage (V_ICM) should be within -7V to +12V to ensure proper operation.

3. Output Configuration:

   • The output short-circuit current (I_SC) should not exceed 100mA to avoid overheating or damage.
   • Ensure the output high-level voltage (V_OH) and low-level voltage (V_OL) meet the specified levels for reliable signal transmission.

4. Driver Enable:

   • Set the driver enable input high-level voltage (V_IH) to at least 2.0V and the low-level voltage (V_IL) to no more than 2.0V to control the driver state.
   • Monitor the driver enable input leakage current (I_IL) to ensure it remains within the specified range.

5. Differential Output:

   • The differential output voltage (V_ODH and V_ODL) should be within the specified ranges for high and low states, respectively, to maintain signal integrity.

6. Timing:

   • The propagation delay time (t_pd) and skew (t_skew) should be considered when designing the system to ensure timing requirements are met.

7. Environmental Conditions:

   • Operate the device within the specified temperature ranges to ensure reliable performance and longevity.
   • Store the device in a controlled environment to prevent damage from extreme temperatures.

8. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow proper soldering techniques to ensure good electrical connections and avoid thermal stress.

By adhering to these parameters and instructions, you can ensure optimal performance and reliability of the SN75176BDR in your application.

(For reference only)