Details

---

BUY 2SK68A https://www.utsource.net/itm/p/12599574.html

Parameter	Symbol	Min	Typical	Max	Unit
Drain-Source Voltage	Vds	-	-	400	V
Gate-Source Voltage	Vgs	-10	-	10	V
Continuous Drain Current	Id	-	15	-	A
Pulsed Drain Current	Idp	-	30	-	A
Power Dissipation	Ptot	-	-	150	W
Junction Temperature	Tj	-55	-	175	掳C
Storage Temperature	Tstg	-55	-	150	掳C
Thermal Resistance (Junction to Case)	R胃jc	-	0.75	-	掳C/W

Instructions for Use:

1. Handling Precautions:

   • Avoid static electricity; use proper ESD protection.
   • Do not exceed the maximum ratings listed in the table.

2. Mounting:

   • Ensure good thermal contact with the heatsink to manage junction temperature.
   • Use thermal compound to enhance heat transfer.

3. Biasing:

   • Apply gate voltage within the specified range to avoid damage.
   • Use a gate resistor to limit current and prevent oscillations.

4. Operation:

   • Operate within the continuous drain current limits to avoid overheating.
   • For pulsed applications, ensure the pulse width and frequency do not exceed safe operating conditions.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready to use to protect from moisture and static.

6. Testing:

   • Use a suitable multimeter or tester to check the continuity and resistance between pins.
   • Test in a controlled environment to avoid accidental damage.

7. Troubleshooting:

   • If the device fails, check for overvoltage, overcurrent, or overheating conditions.
   • Replace any damaged components and retest the circuit.

(For reference only)