Details

---

BUY TF561S https://www.utsource.net/itm/p/12599582.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Operating Voltage	Vcc	2.0	3.3	5.5	V	Supply voltage
Operating Current	Icc	-	0.1	1.0	mA	Quiescent current
Output Current	Iout	0.1	5	20	mA	Maximum output current
Rise Time	Tr	-	10	20	ns	Time for output to rise from 10% to 90%
Fall Time	Tf	-	10	20	ns	Time for output to fall from 90% to 10%
Propagation Delay	Tpd	-	15	25	ns	Time delay between input and output
Operating Temp.	Toper	-40	-	85	掳C	Operating temperature range
Storage Temp.	Tstg	-65	-	150	掳C	Storage temperature range

Instructions:

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 2.0V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Current Limitations:

   • The maximum output current (Iout) is 20mA. Do not exceed this limit to prevent damage to the device.
   • The quiescent current (Icc) is typically 0.1mA but can go up to 1.0mA under certain conditions.

3. Timing Parameters:

   • The rise time (Tr) and fall time (Tf) are both typically around 10ns, with a maximum of 20ns.
   • The propagation delay (Tpd) is typically 15ns, with a maximum of 25ns.

4. Temperature Considerations:

   • The operating temperature range (Toper) is from -40掳C to 85掳C.
   • The storage temperature range (Tstg) is from -65掳C to 150掳C.

5. Handling and Storage:

   • Store the device in a dry, cool place within the specified storage temperature range.
   • Handle the device with care to avoid static discharge, which can damage the component.

6. Mounting and Soldering:

   • Follow standard soldering procedures to ensure proper mounting on the PCB.
   • Avoid excessive heat during soldering to prevent damage to the device.

7. Testing:

   • Before integrating the device into a circuit, test it using a known good setup to verify its functionality.
   • Use appropriate test equipment to measure parameters such as rise time, fall time, and propagation delay.

8. Application Notes:

   • Refer to the datasheet for detailed application notes and example circuits.
   • Ensure all connections are secure and free from shorts or open circuits.

(For reference only)