Details

---

BUY 74LS00 https://www.utsource.net/itm/p/12600247.html

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	VCC	4.75	-	5.25	V
Input Low Voltage	VIL	-	-	0.8	V
Input High Voltage	VIH	2.0	-	-	V
Output Low Voltage	VOL	-	0.25	0.4	V
Output High Voltage	VOH	2.7	-	-	V
Input Leakage Current	IIL	-1.0	-	-	mA
Output Low Current	IOL	-	-	-8	mA
Output High Current	IOH	-	-	0.4	mA
Propagation Delay Time	tpd	-	9	-	ns
Power Dissipation	PD	-	-	100	mW

Instructions for Using 74LS00

1. Power Supply:

   • Connect V_CC to +5V and GND to 0V.
   • Ensure the supply voltage is within the specified range (4.75V to 5.25V) to avoid damage.

2. Input Connections:

   • Connect input pins to either V_CC (high) or GND (low).
   • Use pull-up or pull-down resistors if necessary to prevent floating inputs.

3. Output Connections:

   • Connect output pins to the next stage of your circuit.
   • Ensure the load current does not exceed the maximum output current ratings (I_OL = -8mA, I_OH = 0.4mA).

4. Propagation Delay:

   • Consider the propagation delay time (t_pd) when designing high-speed circuits to ensure timing requirements are met.

5. Operating Temperature:

   • The 74LS00 operates over a temperature range of -40掳C to +85掳C. Ensure the operating environment is within this range.

6. Storage:

   • Store the 74LS00 in a static-protective bag to prevent electrostatic discharge (ESD) damage.

7. Handling:

   • Handle the 74LS00 with care to avoid physical damage. Use proper ESD precautions when handling the device.

8. Testing:

   • Before integrating the 74LS00 into your final design, test it on a breadboard or evaluation board to ensure it functions correctly.

9. Decoupling Capacitors:

   • Place decoupling capacitors (typically 0.1渭F) close to the power pins to filter out noise and stabilize the power supply.

10. Schematic and Layout:

    • Refer to the datasheet for the pinout and recommended PCB layout to ensure correct connections and optimal performance.

(For reference only)