Details

---

BUY 2SC2291 https://www.utsource.net/itm/p/12600269.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	80	V
Collector-Base Voltage	VCBO	-	-	90	V
Emitter-Base Voltage	VEBO	-	-	5	V
Collector Current	IC	-	3	5	A
Base Current	IB	-	-	0.6	A
Power Dissipation	PT	-	-	65	W
Transition Frequency	fT	-	150	-	MHz
Storage Temperature Range	TSTG	-55	-	150	掳C
Operating Temperature Range	TA	-55	-	150	掳C

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to manage the power dissipation.
   • Use insulated mounting hardware to avoid short circuits.

2. Biasing:

   • Apply base current (I_B) carefully to control collector current (I_C).
   • Use a current-limiting resistor in series with the base to prevent excessive base current.

3. Voltage Ratings:

   • Do not exceed the maximum ratings for V_CEO, V_CBO, and V_EBO.
   • Ensure that the operating voltage is within the specified range to avoid damage.

4. Thermal Management:

   • Monitor the temperature to ensure it stays within the operating temperature range.
   • Use thermal paste between the transistor and the heat sink for better heat transfer.

5. Storage:

   • Store the transistor in a dry, cool place within the storage temperature range.
   • Handle with care to avoid mechanical stress or damage.

6. Testing:

   • Use a multimeter or transistor tester to verify the functionality before installation.
   • Check for any leakage currents or short circuits during testing.

7. Safety:

   • Always disconnect the power supply when making connections or adjustments.
   • Use appropriate protective equipment when handling high-voltage circuits.

(For reference only)