Details

---

BUY 1.5KE200CA https://www.utsource.net/itm/p/12600293.html

Parameter	Symbol	Value	Unit
Maximum Repetitive Peak Reverse Voltage	VRRM	200	V
Maximum DC Reverse Working Voltage	VRWM	140	V
Maximum Average Forward Rectified Current (Tc=75掳C)	IFAV	1.5	A
Maximum RMS Forward Current (Tc=75掳C, Sinusoidal Waveform)	IRMS	1.8	A
Maximum Non-Repetitive Peak Surge Current (Half Sine Wave, 10ms Duration)	IFSM	22.5	A
Maximum Junction Temperature	TJ(MAX)	150	掳C
Storage Temperature Range	TSTG	-65 to 150	掳C
Operating Temperature Range	TOPR	-65 to 125	掳C

Instructions for Use:

1. Voltage Rating: Ensure that the maximum repetitive peak reverse voltage (VRRM) does not exceed 200V. The maximum DC reverse working voltage (VRWM) should not exceed 140V.
2. Current Rating: The device is rated for a maximum average forward rectified current (IFAV) of 1.5A at a case temperature of 75掳C. For sinusoidal waveforms, the maximum RMS forward current (IRMS) is 1.8A.
3. Surge Current: The maximum non-repetitive peak surge current (IFSM) is 22.5A for a half sine wave with a 10ms duration.
4. Temperature Considerations: The maximum junction temperature (TJ(MAX)) is 150掳C. Store the device within the storage temperature range (-65掳C to 150掳C). Operate the device within the operating temperature range (-65掳C to 125掳C).
5. Mounting: Ensure proper heat dissipation to maintain the device within its operational temperature limits. Use appropriate heatsinks if necessary.
6. Handling: Handle the device with care to avoid mechanical damage. Follow standard ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.
7. Testing: Before installing the device, verify its parameters using a multimeter or other suitable testing equipment to ensure it meets the specified ratings.

(For reference only)